We go deep on knife changes with some large window tools. A comprehensive guide to safely changing edges.
You’ll receive a confirmation email with the details shortly.
Rangate TV
Our whole video library is available for you to browse here. Use the filters on the left to watch videos on a specific topic.


This guide shows you how to safely change out each knife type on our Multi-Use Cutter.

This guide shows how to safely change out all of the knives on our adjustable grooving cutters.

This guide shows how to change out the knives on a spiral cutter. Note this video depicts our previous aluminium spiral cutter design.

This guide shows how to safely change out all the knife types on our lift and slide cutter.

This video shows how to use our Torque wrenches, which turn over with a click after applying the correct amount of torque.

This video goes over using our Adjustable Groovers to make stub tenons.

This video takes you through the use of our Full Reference Glue Joint Cutter.

Overview of how easy it is to run our Deep Groove Glue Joint Cutter.

Lock Miter cuts have a reputation as tricky- this video will help you get it right, every time!

The Vari Angle Cutter can be used for many different jobs. See how to get the most out of it in this video.

We use our cabinet door set and panel raise cutter to put together a classic 5 piece cabinet door.

Clips from Alpine Workshop attendees using the spiral cutter to make chairs.

Clips of Alpine Workshop attendees using the Spiral Cutter to make chairs

Clips of Alpine Workshop attendees using the Spiral Cutter to make chairs.

We go through the process of building the frames for captured-panel doors, as well as French doors.

Using our Multi Use tool to clean up edges and put radiused edges on our stock.

This shows how to put together paneling for flooring or walls with the Multi Use Cutter.

Video from Alpine Workshop showing how to craft Lift and Slide sashes

We use the Multi-Use cutter to groove the frame for a Lift and Slide door.

Using the Multi Use Cutter to cut gasket grooves for our sash.

Setting up a custom zero clearance fence to shape large sashes at the Alpine Technical Workshop.

Shaping the sash of a large door at the Alpine Workshop using a custom zero clearance fence

Shaping the outside of a large sash after assembly.

Quick shot of some window components after their first pass through the shaper at the Alpine Workshop.

Quick video guide on how to increase or lessen the flow of glue through the standard Pizzi glue gun.

Quick guide on how easy it is to swap out Pizzi nozzles on the standard gun.