You’ll receive a confirmation email with the details shortly.
Products
Engineering is our commitment. We founded Rangate to offer only tooling and equipment designed and built to the highest standards of performance and safety.
This AWFS floor model is available for special pricing. Use the order form on this page to reserve your tool with a deposit. We'll ship your order in late July.
This AWFS floor model is available for special pricing. Use the order form on this page to reserve your tool with a deposit. We'll ship your order in late July.
This AWFS floor model is available for special pricing. Use the order form on this page to reserve your tool with a deposit. We'll ship your order in late July.
This AWFS floor model is available for special pricing. Use the order form on this page to reserve your tool with a deposit. We'll ship your order in late July.
This AWFS floor model is available for special pricing. Use the order form on this page to reserve your tool with a deposit. We'll ship your order in late July.
This AWFS floor model is available for special pricing. Use the order form on this page to reserve your tool with a deposit. We'll ship your order in late July.
ReadySet, Go! This set includes everything you need to get stated using Knot Filler, plus 1 standard 9-rod bag of your choice of our Knot Filler colors. Compared to our starter set, the ReadySet is for users who already know which color is right for them.
This AWFS floor model is available for special pricing. Use the order form on this page to reserve your tool with a deposit. We'll ship your order in late July.
This AWFS floor model is available for special pricing. Use the order form on this page to reserve your tool with a deposit. We'll ship your order in late July.
This AWFS floor model is available for special pricing. Use the order form on this page to reserve your tool with a deposit. We'll ship your order in late July.
This AWFS floor model is available for special pricing. Use the order form on this page to reserve your tool with a deposit. We'll ship your order in late July.
This AWFS floor model is available for special pricing. Use the order form on this page to reserve your tool with a deposit. We'll ship your order in late July.
Our clients have always asked us for our advice on tooling up their shapers. Just as there’s a short list of essential hand tools every woodworker should own, there are some timeless shaper cutters which perform the fundamental cuts almost every project will require- rebating, grooving, tenoning, and profiling. Together as the Joinery Series, they’re available for an advantageous set price.
The Craftsman Series builds on the foundation of our Joinery Series, adding a precision thin adjustable groover and our versatile spiral cutter. These tools expand your possibilities, enabling you to do tight copy shaping, as well as thin grooving all the way down to 4mm. This set is right for woodworkers looking for the freedom to create creative, custom projects featuring edge joining, slim joinery, and tight contours with a finish-quality cut.
Custom-built tools which exceed the highest expectations for precision and accuracy are the core of our business. Every installation is unique, and so the tools we build are engineered to realize your design- every detail, every dimension, every time.
When your job calls for a thin groove of considerable depth, our thin adjustable groovers stand out for their accuracy and fine cut. Both are adjustable to nearly double their base groove size, giving you added flexibility.
This spiral cutter is a versatile all-purpose tool which delivers clean, finish-quality cuts on a wide variety of straight and angled applications. It's tall enough to work with even thick workpieces.
Our adjustable groovers allow you to cut precise grooves which require no sanding or touch-ups, adjustable to nearly double width for each tool. Best of all, each ships with spacers to enable one set to perform tenoning operations as well.
Our Multi-Use tool has become an industry standard for its versatility in tackling nearly any window, door, or millwork machining job. We're constantly hearing new uses for it from our clients- It's excellent for tenoning, grooving, radius & edge work, and more. What you can do with it is only limited by your imagination!
Check out the image gallery to the left for many helpful knowledge videos that illustrate some of the varied uses for this
We're proud to reintroduce one of our best-loved tools to the marketplace. This shop favorite is a multi-function tool with serious versatility. Rangate engineering makes the difference in delivering a three-in-one cutter that delivers a finish-quality cut in all 3 applications. It's better than ever with NaDia diamond treatment on all insert knives.
This tool cuts with shearing action, which delivers a finish-quality surface across the entire face, with no need for sanding or touch-ups- once you run your fingers over the cut, you'll feel the difference.
We first envisioned this tool as a perfect solution for tight copy shaping and pattern work, but our clients have been using it for so much more! Its innovative design featuring top and bottom spurs lets you rabbet, perform edge joining, and control tight contours and edges with a finish-quality cut. For anyone doing complex pattern or guide work, this tool will quickly become a workshop essential.
Our Universal Swivel Vari Angle Cutter features unique engineering which allows both wings to be adjusted at the same time. This design allows for a broader range of angles than any other cutter- from 45° to -60°. It's flexible enough to do the work of several different tools!
Our glue joint tool is designed for along-the-grain glue joints for door, window, & millwork shops looking to glue up blanks to increase width. We have engineered it to achieve a level of accuracy you won't believe until you try it for yourself, and see the incredible fit of the joints it cuts.
Our glue joint tool is used for solid wood along-the-grain glue joints. It's designed to join your stock on edge. We engineered it to achieve level of accuracy you won't believe until you try it for yourself, and see the incredible fit of the joints it cuts.
With deep 11mm fingers spaced at 6mm, and for a complete range of thicknesses starting at 14mm all the way to 120mm, this 3-piece assembly is the most versatile and adjustable finger joint shaper cutter on the market.
Our lock miter cutter is designed to produce smooth and precise lock miter joints for materials from 13mm to 34mm. Miter joints require strong clamping, and this tool features an innovative design with radiused corners to ease the stress the joint takes during the process.
This tool is essential for anyone making or considering making Lift-and-Slide style doors and windows, transforming what was once a difficult job into the easiest part of milling your frame. With our Lift-and-Slide cutter, you get the accuracy, speed, and peace of mind that comes with using a tool designed specifically for the job.
If your window or door design includes advanced multi-point locking systems, our Euro Groove tool is essential. We've engineered this cutterhead to allow for a reference point for the installation of a nail or screw, a time-saving feature you won't find with standard grooving tools.
Our Stile and Rail set has greatly simplified the process of milling classically styled kitchen cabinet doors. It's engineered to deliver a smooth, finish-quality cut while making changing from stile to rail production faster and easier than with traditional cutters.
NEW: Bevel Shaker Elements are now available to enable shaker door production utilizing the same base tool set.
Slant Profile knives are also available for this tool set.
This set is designed specially for traditional North American cabinet doors from 19 to 25mm (~3/4'' to 1").
These solid carbide inserts can be installed on our Rangate Stile and Rail set to produce clean, modern slant profile 5-piece cabinets. Each order must contain a minimum of 2 knives.
Our new set is designed specifically for beveled shaker cabinet doors between 3/4" and 1". Thanks to the stacked design pioneered by Rangate, your depth settings are consistent between tenoning and profiling and changing over only requires vertical movement of the spindle.
These two new additional elements stack with the existing tool elements in the Stile and Rail Cabinet set to produce bevel shaker cabinet doors. You get the best of both worlds- the capability to do sleek and modern cabinet doors, while enjoying the ease of set-up its 1-2-3 same-diameter stacked design.
With up to 3 options for material thickness and up to 4 available profiles in one set, our interior & exterior door set enables a level of flexibility and customization that grows as your business does. No matter what your design calls for, our set can adapt to build timeless, beautiful interior and exterior doors. Our standard order comes equipped for slot and tenon style joinery.
Our panel raise cutter rounds out the package for classic North American cabinet and door profiles. Select from our designed profiles, or have our engineering team build to your needs- the possibilities are endless!
This cutter is designed to cut finish-quality radiused edges or full bullnose rounding from 5mm to 9mm. It's an ideal cutter for solid wood furniture and millwork, where radiused edges give a classic design and more longevity for your finishing.
This cutter machines the complete jamb in one pass, significantly streamlining your build process with the cut quality and engineering precision you've come to expect from our tools. Versatile enough to match the exact specifications of your door design, this cutter turns what was once a multi-stage process into a single cut, greatly increasing your volume capacity.
This cutter accepts a full range of corrugated-back high speed steel knives with an extra-tall profile height of 100mm. If you're looking for a flexible alternative for specialty solid wood profiling for furniture, millwork, or windows and doors, this cutter will quickly become invaluable in your shop.
If you are just getting into window production, our FLEXset is the most versatile tooling choice you can make. It's able to produce two different window styles using the same cutters, while containing the essential tools you'll be using even as your range and volume expand. Best of all, we designed it to minimize your initial investment so you can enter the market without overstretching your budget.
This set ships with standard solid carbide inserts, and can optionally be ordered with our NaDia diamond treatment applied on all insert knives.
If you're using a Garniga cutter system and require fresh knives, screws, wedges, or other support for your cutters, we're the best people to talk to. Our team has over 30 years of experience working with Garniga, and is ready to help.
If you're doing short-run, highly customized profile work, this cutter set might be exactly the solution you've been looking for. The set comes ready with seven of our most popular profiles, giving you instant flexibility. More than a hundred profiles are available to meet any design request you've got.
Our Rub Bearing Kit is designed to replace systems that require a separate bearing for each small diameter.
Our design allows you to expand with your needs. The base kit includes 1 ring for the most common size, 125mm. Any larger-diameter ring is available through Rangate. We stock two sizes common to our standard cutters:
138mm: Matches our RCCD Cabinet Door Set
160mm: Matches most of our standard cutters.
This European-engineered shutter cutting assembly is designed for the shaper to produce the Blinds (shutters) known in the industry as “Naco PL70”, a traditional European shutter made of solid wood.
RSKZE01 Series
Our nano-diamond NaDia coating allows you to go 3 or more times as long between changing your Tersa™ knives for planers, jointers, or moulders. With our blades, you get the best of both worlds; the affordability of a HSS knife with a lifespan and cut quality that exceeds carbide. Each order is for a package of 2 knives.
RSKZE04 Series
If you're using Terminus™ knives in your planer, jointer, or moulder, our diamond-treated edges deliver more value than any other knife in the market. These edges last 2-3 times longer than untreated Terminus™ knives, and deliver the smoothest cut you'll find. Each order contains 2 diamond-coated HSS M2 knives.
This powdered detergent, commercially known as Acusticlean 15 AE, is for cleaning tools after heavy use and accumulation of debris and grime.
This powdered detergent is designed to effectively clean aluminum body tools, like our Spiral Cutter.
These torque wrenches are the ideal for tightening and loosening the screws on all of our Zuani cutting tools. They are designed not to strip or apply excess pressure, and will shut off the torque delivered to the screw with a characteristic click when the right tightness has been reached. Take the guesswork out of knife changes and save yourself the time, money, and potential safety hazards stripped or improperly tightened screws on your tools can mean by using the right tool for the job.
These cut-resistant gloves have a nitrile coated palms and fingers, to protect your hands while mounting and demounting your tools. We recommend you wear them any time you handle your tools. All of our gloves were made in Canada.
This German-manufactured CE folding ruler is a shop favorite in Europe, which we carry for easy measurements. The ruler is comprised of 10 fold-out sections of 20cm. Each axis has angular markings for 90°,75°, 60°, and 45° for quick reference.
These torque wrench delivers the correct amount of torque for knife changes on our Profile Cutter Set.
This steel stand is an essential part of any CNC routing tool change process. With auto-locking roller bearings and positional adjustability to 90°, it’s a convenient and safe way to secure your tool in place before you perform any knife or router bit changes.
This clamping nut is designed to improve dust and chip evacuation during nesting and conventional CNC Routing operations. It replaces the standard clamping nut directly on the collet chuck, and provides a dramatic improvement in evacuating dust and chip from the workpiece to your CNC machine's centralized dust collection.
Each order includes a steel 95/100 hook wrench for correct torque tightening and loosening. The same wrench is appropriate for both ER32 and ER40 units.
Getting an accurate measurement of router bits with 3 cutting edges is difficult and unreliable with standard calipers. These 3-point calipers allow you to get the precise dimensions of any Z=3 bit within moments once properly calibrated.
These chucks are for HSK 63-F compatible CNC machines, and are designed to fit ER32 collets. Check your machine and tool specifications before ordering.
These chucks are for HSK 63-F compatible CNC machines, and are designed to fit ER40 collets. Check your machine and tool specifications before ordering.
Proper care for your CNC cones and collets will extend the lifespan of these components, maintain a better cut finish, and prevent unsafe working conditions. We highly recommend this set of specialized cleaning tools for any shop producing with a CNC router.
Our precision spring collets are designed to reduce vibrations on tools and machines during routing, lengthening the lifespan of your collets and tools. These are designed to meet the ER32 machine standard- consult what your chucks are designed to fit before ordering.
Our precision spring collets are designed to reduce vibrations on tools and machines during routing, lengthening the lifespan of your collets and tools. These are designed to meet the ER40 machine standard- consult what your chucks are designed to fit before ordering.
These tool holding arbors are engineered to use the HSK standard to be as stable and long-lasting as possible. Confirm your CNC router is designed to work with the HSK standard before ordering.
Getting the proper tightness when setting a CNC tool is crucial- both overly tight and loose tools can be serious safety hazards. These wrenches make audible click when at the right tightness, giving you optimal performance and peace of mind.
Our 'Bird's-Mouth' mortise bits are designed to run on all standard mortising machines. These carbide-tip bits feature extended longevity compared to standard high speed steel tips.
Looking for the full set of bits? Click here to save 10% on a full set of 5. (Does not include new ø20 mm bit)
When you purchase the full set of 5 bits, we offer a 10% discount. Each bit features the same shank dimensions for easy changes among your whole set.
Looking for a specific bit? order individual bits here!
Rangate offers NoRot Dowel Drillbits, which are designed specifically for our NoRot Dowels. With these bits, you can have confidence that your NoRot Dowel constructions will be a perfect fit, every time.
Thes drilling heads are designed to accurately and easily bore holes to fit door handles for tilt & turn windows and lift & slide doors. The Trimatic bores the three holes necessary to fit a cremone bolt in one pass.
The Pizzi 9001 Pressurized Glue Tank is a proven glue system which is a favorite at wood shops due to its reliability and durability. Our Pizzi systems allow you to finish glue tasks faster and without mess, with less waste and more precision than working manually with glue bottles.
This unit has an internal, replaceable liner intended for use with PVA glues such as a well-known one by Titebond®.
Standard unit includes:
• 1.5 gallon steel pressurized glue tank
• Pizzi standard glue gun equipped with universal nozzle
• Connecting 3 meter nylon hose
• Tap Adapter for cleaning nozzles after use
This is our lightest Pizzi pressurized glue system. Its compact stainless steel body is as durable as any of our larger tanks, and it accepts the full range of Pizzi accessories.
This unit has an internal, replaceable liner, and is intended for use with PVA glues such as a well-known one by Titebond®.
For larger scale shops with heavy daily glue work, we offer our 9012 glue system. It features a stainless-steel body which resists corrosion and wear from salt air and rough conditions, as well as a higher glue volume. Our Pizzi pressurized glue systems allow you to finish glue tasks faster and without mess, with less waste and more precision than working manually with a glue bottle.
This unit has an internal, replaceable liner intended for use with PVA glues such as a well-known one by Titebond®.
For our largest industrial clients looking to run multiple guns off of one tank, we carry this extra-large 5-gallon tank. It's ideal for running multiple guns off of the same tank in heavy-duty use. This tank can serve as the hub of a gluing station for nearly any size of shop.
This unit has an internal, replaceable liner intended for use with PVA glues such as a well-known one by Titebond®.
These tanks are available as previously used units with refurbished internal components. Each has been verified by our team to be in good working condition, and are ready to stand up to heavy-duty use in an industrial production environment.
The 9021 5 gallon system is ideal for running multiple guns off of the same tank. With advantageous pricing, it's an excellent opportunity to seriously improve the speed of your production line's gluing station.
This unit has an internal, replaceable liner intended for use with PVA glues such as a well-known one by Titebond®.
Our standard gun has established itself as an industry standard for its durability and suitability for just about any glue work you can think of. The flow of PVA glue is controlled by a hand lever, which allows for better control than with a handheld glue bottle. It accepts the full range of specialized nozzles Rangate offers, allowing you the flexibility to use it for nearly any application.
Our 9902 Glue Gun features a pistol type ergonomic grip, which can reduce strain in repetitive, heavy use glue work. The flow of glue is controlled by a hand lever, which allows for better control than with a handheld glue bottle. It accepts the full range of specialized nozzles Rangate offers, allowing you the flexibility to use it for nearly any application.
0003
Our Universal Nozzle is an industry standard which is designed to surpass working with standard glue bottles in accuracy and control. With the same basic design as traditional glue bottle dispensers, it is an adaptable tool with a long pinhole-type nozzle for precise application, even in tight spaces.
These dowel tips are designed to match the diameter and depth of your dowel drilling precisely, speeding up your glue time on dowel joinery and ensuring a tight and even hold on all your joints.
These attachments feature an edge guide to stabilize the gun along the edge of the workpiece for better speed and accuracy. Each can be adjusted with an Allen wrench between a minimum and maximum gluing width, enabling one attachment to double the width of glue spread within seconds. Because of their flexibility to spread the ideal amount of glue for a variety of jobs, these nozzles are a valuable tool for any workshop.
These nozzles are designed to apply glue in a range of groove diameters evenly and without waste. The groove fitting is angled, leaving the operator in a comfortable position to run through groove gluing in one fluid motion.
These roller spatula nozzles combine maneuverable size which can reach into tight spaces with a larger roller's ability to apply a thin, even coat of glue. Each features a long neck for ease of use in accessing deep spots and places which are awkward to glue. They're best suited to work with short tenons or finger joints which can be weakened by over-gluing with traditional bottles.
These nozzles are a straightforward solution for simple wide glue spreading on flat surfaces between 72 and 180mm.
Rubber roller nozzles are an ideal all-purpose tool for any glue work calling for thin, even coating of glue on a large surface area. Made of durable rubber, these roller nozzles are made for heavy daily use and will apply the same even layer of glue whether it's the first or 50th application of the day.
These steel pins go inside your rubber or sponge roller to connect with the rest of the roller nozzle, and can be ordered as replacement parts for the one which come with the accessory.
These spare parts can be ordered as a replacement for your Pizzi handheld glue spreader. This part is the metal cylinder inside the handheld unit which turns against the glue-spreading surface and transfers glue from inside the body to the rubber spreading surface.
This attachment greatly speeds up the gluing process for single tenons It applies a thin, even coat of glue to both sides at once- compared to working manually with glue bottles, the job is done far faster, and with much less waste.
These spatula nozzles will spread glue on one side of their broad surface area, allowing for more flexibility than a double-sided interior nozzle.
These nozzles are designed for easy tenon gluing, applying glue to both sides of the interior of a tenon simultaneously.
This attachment applies thin, even coats of glue to both sides of a double tenon simultaneously. Compared to working with a manual glue bottle or even a pressurized system, it turns what used to be a painstaking process into a standardized task taking only seconds.
0079
This nozzle is designed for fast and simplified gluing of a tenon joint, spreading a thin and even coat of glue along the top and bottom of both spatula prongs. It achieves gluing with more speed and less waste than working manually with glue bottles.
This steel guide is to be used to anchor to a pinpoint nozzle to provide an edge guide for steady and consistent glue application. This allows for a new level of accuracy and speed in straight-line edge glue work. The Universal Nozzle 0003 and Dispensing Gun 0002 are sold separately.
These brush nozzles feature specialized shapes and dimensions to gently apply glue to surfaces which require a soft touch.
If you'd like to use our Pizzi attachments with a Lamello-brand glue system, or attach Lamello nozzles to your Pizzi glue gun, we offer adapters for both cases.
If you're using a Domino floating tenon system, these nozzles will fit the unique dimensions of the joint perfectly.
These specialized nozzles fit the common mortise mouth dimensions often used in chairs to join pieces together.
If you're using Lamello biscuits to join your project, these nozzles will fit the dimensions of the mouth perfectly, without overgluing.
These specialized nozzles fit joints with two dowel connections in one glue application. For all sizes, there is a distance of 32mm between each dowel's center point.
This specialized triple-headed nozzle glues three ø8mm dowel holes at once. Each dowel is spaced at 32mm. It's perfect for high-speed gluing in standardized product lines, like cabinetry or furniture.
G029G
While finger joints are notoriously difficult to glue properly, this attachment accomplishes a thin, even coat in seconds which allows for a tight grip and a stronger joint than ever before.
G029D
This nozzle is designed specially to fit the glue joint cut by the Garniga 04128 12191 cutter, profile #4. Other numbered Garniga profiles are available as custom orders.
G029C
This nozzle is designed specially to fit the glue joint cut by the Garniga 04128 12000 cutter, profile #3.
This can be ordered as a replacement or spare for the adapter which shipped with your Pizzi tank. This adapter screws into any standard faucet and flushes out all Pizzi nozzles to keep them in good working condition. We recommend this as the easiest and most mess-free way to clean and maintain your Pizzi nozzles.
This replacement base for Pizzi nozzles replaces the threaded plastic portion of the nozzle.
This base is designed for the threaded metal component on the Universal Glue Nozzle as well as our Dowel Nozzles. It threads on to the metal nozzle component as well as the glue gun. This is a replacement part, available in case of damage or wear to the threading of the original.
These replacement nozzle fittings are designed for Pizzi Groove Nozzles and Brush Nozzles and can be ordered as a replacement in case of damage to the original.
This threaded plastic nozzle base can replace the base on our Roller Spatula Nozzles in the case of damage to the original.
Our sponge rollers are designed to work with thinner PVA glues which would drip or run if being spread by a hard surface. If you're working with thin glues or on uneven surfaces which require the roller to adjust to the contours of the wood, these sponge rollers are perfect for the job.
Looking for a PVA glue applicator? For shops which don't require a full-on pressurized glue system yet, Rangate offers Pizzi handheld glue spreaders which are durable and reliable. Our spreaders have a cast aluminum body and have a modular design which makes it easy to disassemble the spreader for easy cleaning after the job is done.
These rubber rollers can be ordered as replacements for the one which came with your Pizzi handheld gluing unit.
This plastic internal glue container for the 9001 can be ordered as a replacement for the one which came with your tank.
This plastic internal glue container for the 9001 can be ordered as a replacement for the one which came with your tank.
This plastic internal glue container for the 9012 can be ordered as a replacement for the one which came with your tank.
This plastic internal glue container for the 9021 can be ordered as a replacement for the one which came with your tank.
This 3-meter / 9.8 foot nylon hose connects to all of our Pizzi glue tanks and guns, and can be ordered as a replacement for the one which came with your tank, or with a second glue gun to run two guns off of the same tank so two operators can use the tank simultaneously. The brass fittings at both ends attach to the tank and gun of your choosing.
This metal bracket which screws onto your Pizzi 9001 tank and holds the water reservoir can be ordered as replacement for the one which came with your tank.
This plastic water reservoir can be ordered to replace the one which came with your tank. While using your Pizzi system, fill this tube with water and place the gun inside in between uses to prevent glue in the nozzle from drying out. Its cylinder shape is appropriate for our standard 0002 glue gun and narrow nozzles, but wider gluing attachments might require our wider 0001A rectangular reservoir.
This metal bracket screws onto your Pizzi glue tank and holds a rectangular water reservoir for wider glue attachments.
The plastic reservoir it holds is 160 mm long, and as such is not suitable for the 180 mm cylinder nozzles (0033 and 0036)
This water reservoir can be ordered as a replacement for the one which came with your Pizzi glue tank.
This item is 160 mm long, and as such is not suitable for 180mm nozzles (0033 and 0036)
This rubber O-ring gasket replaces the one which came with your Pizzi standard glue gun and can be ordered as a replacement. This gasket should be checked on an annual basis, and replaced if necessary. Price is for a package of 10.
This rubber gasket replaces the one which came with your tank and can be ordered as a replacement.
This rubber gasket replaces the one which came with your 1.5 gallon 9001 glue tank and can be ordered as a replacement.
With highly rot-resistant properties, the Rangate No-Rot Dowels are perfect for use in any projects exposed to moisture, heat, and cold, where over time, ordinary dowels can fail and become the weak point of the entire construction. It's great for window, door and any outdoor furniture solid wood joinery.We have matching dowel drill bits for proper glue up.
Omni Joint is a mechanical fixing system for the joinery of wood windows, doors, furniture and art pieces. This Italian-engineered metal locking is a tested and certified building component by the Rosenheim Institute in Germany.
Imagine assembling a door in minutes, with no gluing or clamping; it's time-saving, space-saving and cost-saving on gluing and clamping equipment. These are all key advantages for solid wood window, door and furniture manufacturers. This system is great for tables, furniture, art pieces, and even trellis work.
Omni Joint CNC Series
These Omni Joint components are for CNC machining.
There are two types of door joints: corner joint units for the corners of a frame or sash, and central joint units for mullions or rails.
These Omni joint components are for manual drilling, using a special Omni Joint jig.
Units are split between corner joint units for the corners of a frame or sash, and central joint units for mullions or rails.
These jigs securely hold your frame components and have a built-in alignment system to ensure an accurate fit between your stiles and rails. Compared to working with dowels and glue, Omni Joint fastenings do not fail or loosen with time, and can be assembled in minutes with no clamping or glue.
Our Italian-engineered Arch Clamp is designed to keep angled finger joints under pressure. The eccentric presses are covered in rubber to protect the wood from damage during pressing.
This lifter device makes life easier when moving long beams or large panels which would otherwise be difficult to carry and move.
This Multipress RPW model focuses on smaller and medium size production looking for a capable and cost-effective Multipress system. Flexible and adjustable, with available options ideal for mitered and angled components. Each pressing element can exert up to 2000 lbs of pressure.
Standard unit includes:
• Powder-coated hollow steel frame
• 3 manual rack-and-pinion pressure elements
• 90° stopper for lateral pressure
The displayed prices do not include crating and shipping totals.
The Barth Multi-Press RP is the most popular workhorse model from the world's premier manufacturer of clamping and pressing equipment. This model is a manually operated hydraulic frame press with a 90° stop and up to 2000kg of pressing power available, and highly customizable for your shop's specific needs.
Standard unit includes:
• Powder-coated hollow steel frame
• 3 manual hydraulic pressure elements
• 90° stopper for lateral pressure
Financing is available for Barth press orders. The displayed prices do not include crating and shipping totals.
Our new RPG pricing enables your Barth to be as custom as your work is. The base prices are for the powder-coated hollow steel frame, giving you complete freedom to customize with only the items that match your needs, every step of the way.
The RPG frame adds a new level of customization with no top crossbar- you can position the pressing elements or eccentric upper clamping fixtures wherever you need them to be. This opens a whole new world of possibilities and uses for your frame press. It's ideal for shops producing highly custom or complex workpieces.
Financing is available for Barth press orders. The displayed prices do not include crating and shipping totals.
Our new RPG pricing enables your Barth to be as custom as your work is. The base prices are for the powder-coated hollow steel frame- now you can get the options that match your needs, every step of the way.
The RPG-25 series has a taller basic frame with no top crossbar- you can position the pressing elements or eccentric upper clamping fixtures wherever you need them to be. This opens a whole new world of possibilities and uses for your frame press. It's ideal for shops producing highly custom or complex workpieces in volume.
Financing is available for Barth press orders.The displayed prices do not include crating and shipping totals.
This Barth RPG L20 Multipress features a perforated plate on the clamping surface- perfect for arched or angled pieces which require special support. With the addition of rack and pinion peg units, no shape is too eccentric to clamp securely!
Our new pricing enables your Barth to be as custom as your work is. The base prices include:
• Powder-coated hollow steel frame with 90º Stopper for Lateral Pressure
• Perforated steel backplate for mounting Barth accessories
You have full freedom to customize your frame with vertical or lateral pressure elements from the accessory table below! Financing is available for Barth press orders. The displayed prices do not include crating and shipping totals.
This Barth RPG L20 Multipress features a perforated plate on the clamping surface- perfect for arched or angled pieces which require special support. With the addition of rack and pinion peg units, no shape is too eccentric to clamp securely! Compared to the RPG L20, the L25 series is taller, for more overall clamping area.
Our new pricing enables your Barth to be as custom as your work is. The base prices include:
• Powder-coated hollow steel frame with 90º Stopper for Lateral Pressure
• Perforated steel backplate for mounting Barth accessories
You have full freedom to customize your frame with vertical or lateral pressure elements from the accessory table below! Financing is available for Barth press orders. The displayed prices do not include crating and shipping totals.
New to our Knot Filler? We recommend this set, which includes a heating gun, cooling block, chisel, and 1 starter bag with a variety of colors to try. It's the fastest and easiest way to get started repairing your stock.
** Picture shows our legacy Mixed Pack. This new Starter Pack offers 4 rods in 4 different colors.**
Already have a ø12mm dispensing gun, a wide chisel and a flat cooling block to harden? Get a 4-Rod Starter Pack or a 9-Rod Combo Pack instead to try the knot filler out. It's a great alternative to epoxy in many wood repairing applications.
Know the one color you want already? Try our ReadySet instead.
Questions about Knot Filler? Click here for answers.
Rangate Knot Filler is one of the most powerful tools available for any wood shop. Imagine all the time you would save with a non-toxic, permanent repair that’s ready to be worked in under 5 minutes, using common tools available in any shop. It's a great alternative to epoxy in many wood repair applications.
We carry 14 different colors in extra-hard or flexible variants to match the specs of your project perfectly. Volume pricing is available once you've found the right fit for your work.
If you need all of the tools to get started, we've got you covered with our Starter Set.
Questions about Knot Filler? Click here for answers.
Our combo packs are a great value that give you the flexibility to work with several Knot Filler colors at an affordable price. We selected our most popular color variants and include 9 rods per bag: Each contains 3 black, 2 mahogany, 2 semi-transparent/knot, 1 walnut, and 1 pine light.
** Picture shows our legacy Mixed Pack. This new Combo Pack offers 9 rods in 5 different colors. **
Questions about Knot Filler? Click here for answers.
With our new Starter Packs, it's never been easier to try Knot Filler in your shop. Experience its speed and effectiveness for yourself, and find out what people are talking about!
Each pack contains 4 rods of our most popular colors: 1 Black, 1 Mahogany, 1 Pine Light, and 1 Semi-Transparent/Knot.
Need a ø12mm temperature adjustable dispensing gun? 50mm chisel? 80mm cooling hardening block? Check out our Knot Filler Starter Set or individual tools for your convenience.
Questions about Knot Filler? Click here for answers.
This heavy-duty heating gun is a popular choice for applying Knot Filler rods. While it's right for the job, it's not your only option- most adjustable temperature hot-glue guns can be used. There are two requirements of your dispensing gun: Our rod's diameter is 12mm (a little less than 1/2") with 295mm (about 11") in length, and there are three melting points depending on the rod used. Please refer to our Knot Filler Rods' colors and melting points chart. If you already have a gun that fits these two requirements, you're set.
Questions about Knot Filler? Click here for answers.
After applying knot filler to a wood imperfection, place this lightweight aluminum cooling block over the repair to absorb the heat of the melted filler to allow it to set quickly and evenly. It features a handle for ease of use, and a large surface area to easily cover large repairs.
Questions about Knot Filler? Click here for answers.
Use our knot filler chisel for removing the excess from your wood repairs after applying our knot filler. It is designed with a flat bottom and wooden hand grip to smoothly slide over your wood surface without scratching or damaging it, removing only the thin layer of knot filler from the top of the repair.
Questions about Knot Filler? Click here for answers.
Knot Filler pellets are designed for high-volume industrial applications. It's the most efficient and cost-effective way to do wood repairs when it is a full-time, every day task at your business. Each order is for a 20kg (44lb) sack of single-color pellets.
RKF300 Series
Our Wood Repair Powder gives you another option for fixing imperfections. All you need is water to achieve a blended, natural repair on furniture, cabinets, or any type of indoor woodworking project.
Each standard unit order of wood repair powder is 5 kg, but per-kilo pricing is available at a cost of US$9.25/CA$11.95 per kg. Bulk discounts are available for orders above 30 kg.
For a more durable repair suitable for use in flooring, try our newWood Repair Hardener.
This hardening liquid was designed to make Wood Repair Powder harder for applications such as flooring. Replace 10 to 20% of the water in your mix with this liquid to creates a durable, stronger finished repair that can stand up to significantly more wear and tear.
These threaded replacement nozzles are compatible with both U-Line (orange) and green Knot Filler guns.
The Barth VakuuCar+ is a mobile workstation with built-in vacuum clamping. With the VakuuCar, your bench can move around with you, and handle and clamp any material at the height and position you want it at. This time and space-saving cart enables you to get the most out of your time in the shop.
The displayed prices do not include crating and shipping totals.
The Barth VakuuCar XL is a large, robust mobile workstation with built-in vacuum clamping. With the VakuuCar XL, your bench can move around with you, and handle and clamp any material at the height and position you want it at. This time and space-saving cart enables you to get the most out of your time in the shop. This model features more worktop area for heavy-duty shop use.
The displayed prices do not include crating and shipping totals.
The VakuuSYST 3.15 is a workbench add-on which transforms your bench with powerful and easy vacuum clamping. The vacuum heads are held by a steel bracket which swings under your table to be securely stowed and out of the way when not in use.
This mobile and flexible lifting table is a wood shop favorite. Our clients appreciate that the LT300 is one of the best-built lift tables available, with a clean design that can stand up to the wear and tear of a working wood shop. Rangate's optimized logistics provides the best value available in the market for customization.
The displayed prices do not include crating and shipping totals.
Aside from a larger worktop, the 300 XL offers a range of customization options for a table as unique as your needs are.
The displayed prices do not include crating and shipping totals. Additional accessories seen in picture are not included in base price.
We're proud to bring JOWI's world-renowned carts to the North American market. These carts feature 2/2 bar arrangements and 660mm bars, in both 11 and 16-bar levels. This robust 660mm version can support heavy loads or solid wood furniture. With these racks, it doesn't matter what you're working on, or where- because what matters is always within reach.
The VakuuSYST 180 adds a powerful and compact vacuum clamp to your worktop. It can be easily clamped to almost any workbench, and is easily stowed or moved to a new job site. Because its height and angle can be freely adjusted, you get the optimal working position every time, saving your time and your back. To release your the workpiece, simply flip the hand slide valve on the vacuum hose.
We're proud to bring JOWI's world-renowned carts to the North American market. These carts feature 2/2 bar arrangements and 900mm bars, in both 11 and 16-bar options. This rack features a deeper depth between levels for doors and other extra deep workpieces.
The X3 features a collapsible scissor design with two loading areas which can be individually sized to fit your needs. Its 1100mm (3.6 ft) bars are perfect for handling long and deep items like panels and long sheets.
The JOWI Gecko transport rack is inclined to the side and the rear- this lets gravity work for you while moving your workpieces. Its intelligent engineering allows one person to roll a fully loaded transport rack safely and quickly, even with large and awkward shapes and sizes.
RJ NA2-780-3/2-40-1/0: Whether you're storing items horizontally, vertically, or both at the same time, the JOWI Nautilus can adapt to move your workpieces securely and without damage. You can even customize the bar alignment for maximum flexibility.
This multi-arm, revolving and height-adjustable JOWI Octopus D1 holds workpieces with a level contact surface, no matter the dimension or shape. Supports are positioned quickly and easily, and coated to keep them free of spray build-up. The result? Maximum finishing efficiency and minimum mist!
The JOWI Octopus D2 is designed for heavy-duty spray finishing. It can support loads up to 120kg (264 lbs) with the same freely positionable radial arms as the original Octopus.
The MIRA wood-ALU system is based on the classic basic design for wood-ALU systems with identical wood thicknesses for sash and frame. This integrated design is a particularly cost-effective and high-performance solution for wood-ALU windows.
NORDWIN is an integrated cladding system for casement windows which can be mounted without changes in the wood cross-section. The flush aluminum profile replaces the glass bead to create a slimmer, streamlined design.
The CORA system fits over the glass bead of an existing window design to give a new, modern look to wooden windows. A variety of intelligent, detailed choices and use of accessories from existing systems make CORA a cost-effective all-around system.
Gutmann LARA cladding is an intelligent solution curtain wall construction capable of meeting the highest standards of performance. This innovative system gives both crafters and architects high-quality technology and nearly endless freedom in designing.
