You’ll receive a confirmation email with the details shortly.
Products
Engineering is our commitment. We founded Rangate to offer only tooling and equipment designed and built to the highest standards of performance and safety.
This spiral cutter is a versatile all-purpose tool which delivers clean, finish-quality cuts on a wide variety of straight and angled applications. It's tall enough to work with even thick workpieces.
This steel stand is an essential part of any CNC routing tool change process. With auto-locking roller bearings and positional adjustability to 90°, it’s a convenient and safe way to secure your tool in place before you perform any knife or router bit changes.
This clamping nut is designed to improve dust and chip evacuation during nesting and conventional CNC Routing operations. It replaces the standard clamping nut directly on the collet chuck, and provides a dramatic improvement in evacuating dust and chip from the workpiece to your CNC machine's centralized dust collection.
Part number RX139.501.RN is for ER32.
Part number RX139.502.RN is for ER40.
Each unit comes with the same hook wrench.
Spring collet, bit, and mount/demount stand are sold separately.
This hook wrench is designed to work with both ER32 and ER40 versions of our Tornado® dust extraction nuts.
These chucks are for HSK 63-F compatible CNC machines, and are designed to fit ER32 collets. Check your machine and tool specifications before ordering.
These chucks are for HSK 63-F compatible CNC machines, and are designed to fit ER40 collets. Check your machine and tool specifications before ordering.
Getting an accurate measurement of router bits with 3 cutting edges is difficult and unreliable with standard calipers. These 3-point calipers allow you to get the precise dimensions of any Z=3 bit within moments once properly calibrated.
Proper care for your CNC cones and collets will extend the lifespan of these components, maintain a better cut finish, and prevent unsafe working conditions. We highly recommend this set of specialized cleaning tools for any shop producing with a CNC router.
Our precision spring collets are designed to reduce vibrations on tools and machines during routing, lengthening the lifespan of your collets and tools. These are designed to meet the ER32 machine standard- consult what your chucks are designed to fit before ordering.
6mm ER32 Collet - RT119.060.N
1/4" ER32 Collet - RT119.064.N
8mm ER32 Collet - RT119.080.N
10mm ER32 Collet - RT119.100.N
12mm ER32 Collet - RT119.120.N
1/2" ER32 Collet - RT119.127.N
13mm ER32 Collet - RT119.130.N
16mm ER32 Collet - RT119.160.N
Our precision spring collets are designed to reduce vibrations on tools and machines during routing, lengthening the lifespan of your collets and tools. These are designed to meet the ER40 machine standard- consult what your chucks are designed to fit before ordering.
HSK63F Arbor ø30 with Length at 105mm
These tool holding arbors are engineered to use the HSK standard to be as stable and long-lasting as possible. Confirm your CNC router is designed to work with the HSK standard before ordering.
Getting the proper tightness when setting a CNC tool is crucial- both overly tight and loose tools can be serious safety hazards. These wrenches make audible click when at the right tightness, giving you optimal performance and peace of mind.
RZ052.713.N is for ER32.
RZ052.714.N is for ER40.
This clamping nut is designed to improve dust and chip evacuation during nesting and conventional CNC Routing operations. It replaces the standard clamping nut directly on the collet chuck, and provides a dramatic improvement in evacuating dust and chip from the workpiece to your CNC machine's centralized dust collection.
Part number RT139.501.RN is for ER32.
Part number RT139.502.RN is for ER40.
Optional Tool: hook wrench can be purchased separately.
Spring collet, bit, and mount/demount stand are also sold separately.
These solid carbide bits are available in both left and right-hand spirals, and are protected with our NaDia diamond treatment process which extends the lifespan of the cutting edge by 3-4 times longer than untreated solid carbide.
