You’ll receive a confirmation email with the details shortly.
Tornado® Dust Extracting Nut without Hook Wrench
This clamping nut is designed to improve dust and chip evacuation during nesting and conventional CNC Routing operations. It replaces the standard clamping nut directly on the collet chuck, and provides a dramatic improvement in evacuating dust and chip from the workpiece to your CNC machine's centralized dust collection.
Part number RT139.501.RN is for ER32. Part number RT139.502.RN is for ER40. Optional Tool: hook wrench can be purchased separately. Spring collet, bit, and mount/demount stand are also sold separately.
This nut creates additional suction from its spiral design, which helps create a 'cyclone' effect which evacuates chip and dust from the workpiece surface to your CNC's dust collection hood. It's optimized for best results when distance of 3-10mm from the workpiece (1/8" to 3/8"), but can achieve good results up to 25mm (1") away. It works most effectively with up-cut spiral bits. The Tornado is especially recommended when cutting materials like chipboard, MDF, and coated panels. This unit does not include with a hook wrench, which can be purchased separately.
• Chuck Type: Compatible with every type of chuck (HSK, ISO, BT, etc.)
• Maximum Tool Diameter: 68 mm
• Maximum Rotation Speed: 20,000 RPM (Suggested range: 16,000-18,000)
• Balance: G2.5
• Weight: 0.265 kg
| SKU | D | D1 | B | B1 | d |
|---|---|---|---|---|---|
| RX139.502.R (ER40) | 92 | 70 | 42 | 7 | M 50 x 1.5 |
Mounting Tornado® Clamping Nuts
Place the spring collet under the nut, applying light pressure.
Screw the chuck onto the Tornado nut slightly, by hand.
Insert the bit into the spring collet from the front side.
Place the assembly onto a mount/demount stand. Use the specialized hook wrench which comes with the nut to tighten. This wrench supplies the correct amount of torque which will not over-tighten the nut.
This set contains a variety of specialized brushes for cleaning CNC equipment.
This tool change stand is an essential part of an efficient tool change process for any CNC routing production.
These ER32 HSK chucks hold your colleted tool for work on a CNC router.
This hook wrench is to be used with our Tornado® dust extraction nuts.
This innovation replaces the standard clamping nut and helps move chips to your dust collection system.
