You’ll receive a confirmation email with the details shortly.
Pizzi 0165 Metered Stainless Gluing System
This unit has an internal, replaceable liner intended for use with PVA glues such as a well-known one by Titebond®.
The 9012's stainless steel body resists rust and corrosion better than other glue tanks, which is ideal for shops near salt water. Its rugged design stands up the wear and tear of daily use in a busy shop. The tank comes equipped with an anatomic grip glue gun 0165P which can accept the full range of specialized Pizzi glue nozzles.
Rangate Pizzi glue equipment is designed for use with PVA glues only. This includes all the common "white glue" and "yellow glue” used in woodworking, like Titebond® I, II, and III. This item is not intended for use with PVC glues or contact cement.
Setting your tank up is simple and quick- fill the plastic interior container with PVA glue, close and pressurize the tank to 5 bar/75 psi with compressed air, and disconnect the air hose. The tank stays pressurized and ready for use for months. Separately, unlike our other traditional pressurized gluing system, this system has a double adjustment: A) Glue flow: Acting on the ring positioned on the back of the glue gun, and B) Extrusion time through a timer: Unscrew/screw the adjustment knob to decrease/increase the extrusion time respectively. For this reason, the system must be connected with 6 to 8 bars of air line pressure. With our recommended maintenance guide, keeping your guns and nozzles in good condition is simple and clear.
Download Pizzi system maintenance guide [pdf, 872kb]
- Max Pressure: 5 bar/75 PSI
- Glue Capacity: 2.5 Gallons
- Dimensions: 30 x 30 x 81 cm / 12 x 12 x 32 in
- Weight (without glue): 17 kg / 37.5 lbs
- Unlike our other traditional pressurized gluing system, this system has a double adjustment: A) Glue flow: Acting on the ring positioned on the back of the glue gun, and B) Extrusion time through a timer: Unscrew/screw the adjustment knob to decrease/increase the extrusion time respectively. For this reason, the system must be connected with 6 to 8 bars of air line pressure.
Product Code | Description |
---|---|
0167 | |
00001 | Pizzi Gun Housing |
09991 | Pizzi Gun Housing Support |
0001A | Rectangular Gun Housing |
0991A | Rectangular Gun Housing Support |
09914 | Nylon Hose with Brass Fittings |
00055 | Nylon Hose for Guns |
10031 | Fastening Stirrup |
10037 | Pressure Regulator Unit |
10038 | #38 Fitting A8 for 9012 |
10041 | O-Ring |
10044 | Fitting |
10156/ 10158/ 10159 | Universal Fitting with Air Valve |