You’ll receive a confirmation email with the details shortly.
Full Reference Glue Joint Cutter
Our current Special is only on the IWF show floor models in limited quantity. Orders in advance will be shipped after IWF in August.
With special V-shaped knives, the tool creates an excellent reference joint up to 60mm tall. This design also allows for increased surface area contact between the joined pieces for a stronger joint. Often simple butt joints will shift out of place during gluing- this tool solves this issue, allowing for stronger joints and easier referencing for glue-ups.
This cutter comes fully equipped with NaDia diamond-treated solid carbide insert knives, along with the correct T-wrench(es) for replacements- see table at the bottom of this page for the full list of NaDia standard tools.
Insert Knife Guide
To ensure your tools will always be ready for use, we recommend keeping one spare set of insert knives on hand for your cutter- the table below will list all the necessary insert knives.Download Insert Knife Guide PDF
|Position||Knife Code||Description||Quantity per Tool||Quantity per Order|
|A||RSKF2.60S1717.0||Profile Knife for Full Reference Glue Joint||3|
|Tool Code||Tool Name|
|RNAG1600475||Thin Adjustable Groover 4 - 7.5 mm|
|RNAG1600595||Thin Adjustable Groover 5 - 9.5 mm|
|RNAG1600815||Adjustable Groover 8 - 15.5 mm|
|RNAG1601224||Adjustable Groover 12.5 - 24 mm|
|RNAG16001530||Adjustable Groover 15.5 - 30 mm|
|RNAG16002040||Adjustable Groover 20.5 - 40 mm|
|RNAG16003060||Adjustable Groover 30.5 - 60 mm|
|RNS125050||Shear Rabbeting Cutter|
|RNRC125060||Adjustable Radius Chamfer Shear Cutter|
|RNGJ13060||Full Reference Glue Joint Cutter|
|RNGJ13047||Deep Groove Glue Joint Cutter|
|RNFJ18014120||Adjustable Finger Joint Cutter|
|RNLM1601334||Lock Miter Cutter|
|RNJ21613||Adjustable Door Jamb Cutter|
|RN02138||Multi-Point Euro Groove Cutter|
|RNCP335.180.2001V||Panel Raise Cutter|
|RNCD1601925||Stile and Rail Cabinet Set|